Beam characteristics |
|
|
|
Version | TINY-100L | TINY-200L | TINY-300L |
Repetition Rate1(Hz) | 1-10Hz | 1-10Hz | 1-10Hz |
Energy(mJ) |
|
1064nm | 100 | 200 | 300 |
532nm | 50 | 100 | 150 |
355nm | 20 | 40 | 60 |
266nm | 10 | 20 | 30 |
Energy Stability RMS(%) |
|
1064nm | <0.7% |
532nm | <1.5% |
355nm | <2.5% |
266nm | <3.5% |
Power Drift2(%) |
|
1064nm | 3% |
532nm | 5% |
355nm | 8% |
266nm | 10% |
Pulsewidth FWHM3(ns) | 4-5ns @1064nm |
Divergence4(mrad) | ＜1mrad |
Beam Pointing Stability5(μrad) | 20μrad |
Timing Jitter RMS6(ns) | ＜0.5ns |
Beam Diameter(mm) | ~5 | ~6 | ~7 |
Transverse Mode7 | GRM mode(Top hat) |
Polarization | Linear |
General characteristics |
|
AC Input | 220 VAC ±5% 50-60Hz |
Power Consumption | <800W（typical 100mJ@20Hz） |
Operating Conditions | Temperature 5-35℃ Humidity<80% |
Warm Up Time(min) | ＜10mins |
NOTES
1.All specifications at 1064nm and 10Hz repetition rate unless otherwise noted.
2.Average in 8 hours with room temperature variation δT＜3℃.
3.Full width at half maximum.
4.Full angle for 86.5% of energy.
5.Represents RMS value deviation from beam mean centroid.
6.With respect to external trigger.
7.GRM resonator mode or stable multimode option. Stable version may operate over a wider range of repetition rate and higher output energy compared with GRM mode.
